The MQP USB Port
Adapter has been designed to allow you to use the
Pin-Master 48, System 2000, or the Model 200* by
connecting to the USB port of your PC.
There has been a trend away from fitting
the traditional Serial or Parallel ports on computers,
particularly laptops. Instead USB has become the
connection of preference. MQP Electronics has developed
this USB Port Adapter to provide full compatibility
with the Parallel Port Protocols of all our existing
programmers. There is no reason for the changing
nature of PC technology to prevent you from continuing
to benefit from your investment in programming equipment.
The USB Port Adapter does not require
you to make any permanent modification to your programmer.
Just plug the Adapter into the parallel port of
the programmer and use the cable to connect to the
USB port of your computer. The Adapter takes up
no more space than the original parallel cable termination.
You will need to be using an operating
system allowing full USB support.
Operating Systems: |
Windows XP, Windows 2000
Windows ME, Windows 98SE
|
Pin-Master 48
|
Any model
|
|
|
System
2000 |
Any Hardware Release with any Module
|
|
|
Model 200 |
The Model 200 must be a parallel port version
(conversion kit is available for most serial
Model 200 units), and you must be running
the Windows version of PROMDRIVER.
|
The USB Port Adapter
comes complete with the following:
For use with the Model 200 you will
also need the optional Gender Changer, owing to
the polarity of the Model 200 Connector.